NIEM Wayfarer 5.1

Disclaimer: This tool was developed by Tom Carlson Consulting LLC. It was created from the official distribution of the data model. Tom Carlson Consulting LLC makes neither claim nor warranty that this tool provides an accurate representation of the NIEM data model. For official and authoritative representations, please visit the official NIEM release website. Non-English text Powered by Google Translate.

for

cbrn:RadRawSpectrum (cbrn:SpectrumType)

A Spectrum data element(s) used to produce derived data. There shall be no duplicate IDREF values in the list. This is required whenever the element is used within a DerivedData block, and is prohibited otherwise.

View UML for type: cbrn:SpectrumType

cbrn:RadRawSpectrum is contained within these types:
cbrn:RadRawSpectrum can contain:
  • cbrn:LiveTimeDuration
        A duration during which a detection assembly is sensitive to the input signal. The value of LiveTimeDuration is always less than or equal to the value of RealTimeDuration, because it does not include the time that the radiation detector was unable to re
  • cbrn:ChannelDataValueList
        A list of values, one for each of a spectrum's channels. The values represent the number of counts per channel.
  • cbrn:EnergyCalibration
        An energy calibration that spectrum measurements can reference as applicable to a particular spectrum.
  • cbrn:IntrinsicFullEnergyPeakEfficiencyCalibration
        An intrinsic full-energy peak efficiency calibration. The intrinsic full-energy peak efficiency at any value of energy is the ratio of the net counts in a peak at that energy to the number of photons impinging on the radiation detector surface at that energy.
  • cbrn:FullEnergyPeakEfficiencyCalibration
        A full-energy peak efficiency calibration. The full-energy peak efficiency at any value of energy is the ratio of the net counts in a peak at that energy to the number of photons emitted by a source at that energy.
  • cbrn:FWHMCalibration
        A FWHM calibration for a gamma radiation detector; i.e., FWHM as a function of energy.
  • cbrn:IntrinsicSingleEscapePeakEfficiencyCalibration
        An intrinsic single-escape peak efficiency calibration. The intrinsic single-escape peak efficiency at any value of energy is the ratio of the counts in the single-escape peak of that energy to the number of photons impinging on the radiation detector surface at that energy.
  • cbrn:IntrinsicDoubleEscapePeakEfficiencyCalibration
        An intrinsic double-escape peak efficiency calibration. The intrinsic double-escape peak efficiency at any value of energy is the ratio of the counts in the double-escape peak of that energy to the number of photons impinging on the radiation detector surface at that energy.
  • cbrn:RadDetectorInformation
        A set of information regarding a radiation detector.
  • cbrn:TotalEfficiencyCalibration
        A total efficiency calibration. The total efficiency at any value of energy is the ratio of the total recorded pulses in a spectrum to the number of photons emitted from a source at that energy.
  • cbrn:RadRawSpectrum
        A Spectrum data element(s) used to produce derived data. There shall be no duplicate IDREF values in the list. This is required whenever the element is used within a DerivedData block, and is prohibited otherwise.
cbrn:RadRawSpectrum can be contained in any of these elements:
  • cbrn:RadRawSpectrum (of cbrn:SpectrumType)
        A Spectrum data element(s) used to produce derived data. There shall be no duplicate IDREF values in the list. This is required whenever the element is used within a DerivedData block, and is prohibited otherwise.
  • cbrn:Spectrum (of cbrn:SpectrumType)
        A single spectrum measurement with references to other pertinent information about the measurement.
Everything cbrn:RadRawSpectrum can contain:
  • via cbrn:SpectrumType
    • cbrn:LiveTimeDuration A duration during which a detection assembly is sensitive to the input signal. The value of LiveTimeDuration is always less than or equal to the value of RealTimeDuration, because it does not include the time that the radiation detector was unable to re
    • cbrn:ChannelDataValueList A list of values, one for each of a spectrum's channels. The values represent the number of counts per channel.
    • cbrn:EnergyCalibration An energy calibration that spectrum measurements can reference as applicable to a particular spectrum.
    • cbrn:IntrinsicFullEnergyPeakEfficiencyCalibration An intrinsic full-energy peak efficiency calibration. The intrinsic full-energy peak efficiency at any value of energy is the ratio of the net counts in a peak at that energy to the number of photons impinging on the radiation detector surface at that energy.
    • cbrn:FullEnergyPeakEfficiencyCalibration A full-energy peak efficiency calibration. The full-energy peak efficiency at any value of energy is the ratio of the net counts in a peak at that energy to the number of photons emitted by a source at that energy.
    • cbrn:FWHMCalibration A FWHM calibration for a gamma radiation detector; i.e., FWHM as a function of energy.
    • cbrn:IntrinsicSingleEscapePeakEfficiencyCalibration An intrinsic single-escape peak efficiency calibration. The intrinsic single-escape peak efficiency at any value of energy is the ratio of the counts in the single-escape peak of that energy to the number of photons impinging on the radiation detector surface at that energy.
    • cbrn:IntrinsicDoubleEscapePeakEfficiencyCalibration An intrinsic double-escape peak efficiency calibration. The intrinsic double-escape peak efficiency at any value of energy is the ratio of the counts in the double-escape peak of that energy to the number of photons impinging on the radiation detector surface at that energy.
    • cbrn:RadDetectorInformation A set of information regarding a radiation detector.
    • cbrn:TotalEfficiencyCalibration A total efficiency calibration. The total efficiency at any value of energy is the ratio of the total recorded pulses in a spectrum to the number of photons emitted from a source at that energy.
    • cbrn:RadRawSpectrum A Spectrum data element(s) used to produce derived data. There shall be no duplicate IDREF values in the list. This is required whenever the element is used within a DerivedData block, and is prohibited otherwise.
  • via cbrn:RemarksComplexObjectType
    • cbrn:RemarkText A placeholder for comments intended to help the consumer of the data to understand better the information encapsulated by the parent element.
  • via structures:ObjectType
    • Nothing